MB QUART POWERSPORTS AMP NA2-400.2 (FREE SHIPPING)

$189.99

-

MB QUART POWERSPORTS AMP NA2-400.2 (FREE SHIPPING)

Category: Tag:

Description

                     CLASS
Full Range Class D

    • VARIABLE VOLTAGE
      0.2V~9V
    • SIGNAL TO NOISE RATIO
      >90dB
    • FREQUENCY RESPONSE
      20Hz-20kHz
    • CROSSOVER TYPE
      Electronic 12dB Per Octave
    • LOW PASS CROSSOVER
      SWITCH LOW PASS 300 HZ
  • BASS BOOST
    0-12dB@45Hz
  • SUBSONIC FILTER
    60Hz
  • POWER @ 2-OHMS
    2 x 200W
  • POWER @ 4-OHMS
    2 x 100W
  • TOTAL CHANNELS
    2
  • AUDIO INPUTS
    RCA
  • POWER TERMINAL 12V/GND
    Molex 10 ga
  • SPEAKER TERMINAL WIRE GAUGE
    Molex Plug Connector
  • FUSING
    1 x 30 Amps
  • CERTIFICATIONS
    Marine & Powersports
  • DIMENSIONS
    3.70 X 5.51 X 1.77 in
    9.4 X 14.0 X 4.5 cm
  • WEIGHT
    2.12 lbs (0.96 kg)

 

  • MARINE GRADE PROTECTION: YES
    Amplifiers are ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
  • PRE-AMP CIRCUITRY: Q-Stasis Pre Amplifier Stage
    The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
  • INPUTS: 1 Pair, RCA Nickel-Plated
    High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • OPERATION MODE: Two channel operation
    Flexible installation allows this amplifier to run in two channel or bridged mono mode.
  • CROSSOVER / SIGNAL SHAPING: Switched FULL / LPF / HPF
    Complete control of amplifier signal, essential when using two or more amplifiers
  • CLASS / TOPOLOGY: Full Range Class D
    Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
  • OUTPUT DEVICES TECHNOLOGY: PWM MOSFET Power Supply
    Stable power through the PC board with minimal heat generation
  • HEAT SINK: Aluminum
    Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
  • POWER SUPPLY: Simpatico Coil Design
    The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  • OUTPUT CONNECTIONS: Quick Dissconect Wires, RCA Connections
    Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
  • CONNECTIONS TYPE: Nickel-plated connections
    Nickel plated corrosion resistant connections
  • DIAGNOSTICS: Three-stage protection circuits
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • MARINIZED / WATERPROOF: YES
    Water resistant for durability in any environment