MB QUART MARINE AMP NA2-500.5 (FREE SHIPPING)

$249.99

-

MB QUART MARINE AMP NA2-500.5 (FREE SHIPPING)

Category: Tag:

Description

  • CLASS
    Full Range Class D
  • VARIABLE VOLTAGE
    0.2V~9V
  • SIGNAL TO NOISE RATIO
    >90dB
  • FREQUENCY RESPONSE
    20Hz-20kHz
  • CROSSOVER TYPE
    N/A
  • CROSSOVER FREQUENCY RANGE
    CH1 & CH2

    Switched HP/ Full
  • CROSSOVER FREQUENCY RANGE
    CH3 & CH4

    Switched HP/ Full
  • CROSSOVER FREQUENCY RANGE
    CH5

    LPF 50Hz-150Hz
  • BASS BOOST
    0-12dB@45Hz
  • SUBSONIC FILTER
    60Hz
  • POWER @ 2-OHMS
    4 x 80W + 1 x 200W
  • POWER @ 4-OHMS
    4 x 40W + 1 x 100W
  • TOTAL CHANNELS
    5
  • AUDIO INPUTS
    RCA
  • POWER TERMINAL 12V/GND
    Molex 10 ga
  • SPEAKER TERMINAL WIRE GAUGE
    Molex Plug Connector
  • FUSING
    1 x 40 Amps
  • CERTIFICATIONS
    Marine & Powersports
  • DIMENSIONS
    3.70 X 8.46 X 1.77 in
    9.4 X 21.5 X 4.5 cm
  • WEIGHT
    3.35 lbs (1.52 kg)
  • MARINE GRADE PROTECTION: YES
    Amplifiers are ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
  • PRE-AMP CIRCUITRY: Q-Stasis Pre Amplifier Stage
    The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
  • INPUTS:
    2 Pair, RCA (Front/Rear)
    1 Pair RCA (Subwoofer) Nickel-Plated

    High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • OPERATION MODE:Four channel and with dedicated subwoofer channel
    Unique design allows this amplifier to power full range speakers with a dedicated channel for a subwoofer.
  • CROSSOVER / SIGNAL SHAPING: Switched FULL / LPF / HPF
    Complete control of amplifier signal, essential when using two or more amplifiers
  • CLASS / TOPOLOGY: Full Range Class D
    Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
  • OUTPUT DEVICES TECHNOLOGY: PWM MOSFET Power Supply
    Stable power through the PC board with minimal heat generation
  • HEAT SINK: Aluminum
    Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
  • POWER SUPPLY: Simpatico Coil Design
    The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  • BASS REMOTE:Included
    Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
  • OUTPUT CONNECTIONS: Quick Dissconect Wires, RCA Connections
    Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
  • CONNECTIONS TYPE: Nickel-plated connections
    Nickel plated corrosion resistant connections
  • DIAGNOSTICS: Three-stage protection circuits
    Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • MARINIZED / WATERPROOF: YES
    Water resistant for durability in any environment